2-4
MK1000 MicroKiosk Product Reference Guide
Wireless Ethernet Setup
The MK1000 can communicate with a host via a wireless (RF) Ethernet connection.
When communicating in this manner the MK1000 can be powered either using the
MK1000’s power supply connected to an AC outlet, or by receiv ing Power-over-Ethernet
via cable.

Wireless Ethernet: Power via AC Ou tl et

With this installation option, the MK1000 communicates to the hos t via a wireless (RF)
connection and receives power via a power supply plugged i nto an AC outlet.
To install the MK1000, follow the instructions below.
1. Provide power to the MK1000 using its power supply.
Insert the round barrel connector at the end of the power supply cable into the
MK1000’s Power port. (See Figure 1-1 on page 1-3 for port locations.)
Plug the power supply into a wall outlet.
2. To mount the MK1000, see Mounting the MK1000 on page 2-11.
After completing the mechanical installation of the MK1000, refer to Chapter 3, Setup and
Installation: Communication to establish communication with the host.