TacT Audio M2150, S2150 owner manual M/S 2150 Connections

	M/S 2150 Connections
Trigger outputs	The M/S 2150 has a trigger “IN” and “OUT” to provide on and standby control
	from a trigger device and to pass the trigger signal to another device.
	Trigger Connectors

AC mains input Connect the M/S 2150 to the AC mains wall socket.

CAUTION: Use the supplied IEC mains cable, or a 3-prong grounded cable only.

Digital Output

Speaker output	The 2150 amplifier has one pair of high quality WBT speaker terminals. These termi-
(normal operation)	nals will accept both spade- and banana-plugs. When connecting your speakers,
	please make sure that the RED/HOT terminal is connected to your speakers’ POSI-
	TIVE terminal and the BLACK/COLD terminal is connected to your speakers’ NEGA-
	TIVE terminal.

RIGHT	LEFT
SPEAKER	SPEAKER

+ - + -

Tact Audio 11