TacT Audio M2150 TacT M/S2150 Software, System requirements Software Installation, Tact Audio

System requirements

Software Installation

Start The M/S2150 software

TacT M/S2150 Software

The M/S2150 is more than just an amplifier. With powerful features such as level balancing, time alignment, and assignable electronic crossovers, you can custom- ize and build the amplifier system that you need, whether your system is biamped, triamped or more. Each of Tact’s amplifiers employ an RS232 in and out connec- tion for control from a Tact master controller. Complete instructions for using the 2150 software can be found in the online help available in the software.

Your computer system must meet the following requirements:

-An IBM compatible PC with Pentium 100 MHz, 64 MB Ram & 100 MB free hard disk space or better

-Microsoft Windows 98, ME, 2000 or XP

-Operating system regional setting must be set to “English(United States)”

-Microsoft Windows-compatible graphics-card and monitor with screen resolution 800x600 or better

-CD-ROM drive

-Microsoft windows compatible 2- or 3- button mouse

-Standard RS-232 serial port with DB-9 connectors

Follow the steps below to install the M/S2150 Room Correction Software:

1 - Start windows and insert the TacT software CD into your CD-ROM drive. 2 - Double-click on the “My Computer” icon on the desktop.

3 - Double-click on the CD icon to launch the CD browser.

4 - Double-click on “Tact 2150 vx.x.exe” and follow the instructions.

After the installation you will have the option to launch the M/S2150 software. If you would like to launch the program at this time when prompted, select “Launch TacT-2150” and the software will start. You should now see the M/S2150 System main-screen.

To start the software go to the Windows “Start” menu, select “Programs” then

“TacT-2150” and click on the “TacT-2150” icon. You should now see the M/S2150 System main screen.

Tact Audio 27