TacT Audio S2150, M2150 owner manual Low, LOW High, CRO menu

Front Panel Display
ADC menu	The M/S 2150 may be equipped with an optional state of the art Analog to Digital
(ADC module optional)	Converter. To further enhance the converter’s performance, the system offers two
	selectable gain values for the ADC input stage. These two values may be assigned to
	each input independently.
	ADC Menu :				3		2
		GAIN:		LOW				IN:2
			LOW			HIGH
					1
		1 - Assignable gain values.
		2 - Input channel currently selected.
		3 - Active gain setting for selected input channel.
	LOW = -6.0dB in reference to 0.0dB. Input sensitivity: 2.2 volt
	HIGH =	0.0dB in reference to 0.0dB. Input sensitivity: 4.4 volt
	Use the “UP” and “DOWN” navigational buttons to scroll through the available options
	and press the “ENTER” button to activate the currently displayed selection. To select
	an analog Input (2) use the “ANALOG” selector button found on the M/S 2150 front
	panel or on the remote control to scroll to the input you would like to edit.

CRO menu	The M/S 2150 can apply user selectable crossovers to the outputs. The default
	setting is set to “OFF” with no crossovers applied. For your convenience there are a
	total of 10 default crossover selections pre-loaded for use with most biamped
	systems. If a different crossover is desired, there are other options using the P.C.
	software included with the unit.
	CRO Menu :	3

CRO : L65, H65, 10

4: L65, H65, 10 *

			1	2
1	-	Crossover selections.
2	-	Active	Crossover	selection.
3	-	Active	Crossover	selection.

Example : Option #4 - 10th order lowpass @ 65Hz + 10 highpass @ 65Hz

(See the “InOut” menu for more information about output settings used with crossover configuration)

Use the “UP” and “DOWN” navigational buttons to scroll through the available options and press the “ENTER” button to activate the currently displayed selection.

20 Tact Audio