TacT Audio S2150, M2150 owner manual Maxlev, Dthr, +12.0, 6.0dB

Front Panel Display

OPT menu	The options menu is designed to control the systems maximum signal level
(Options)	“MAXLEV”, signal detection threshold “DTHR” and wheel speed “WH”.

NOTE: Wheel speed is only available on the M2150.

Options Menu :

	MAXLEV			DTHR	WH
					5
	+12.0			-6.0 dB
		1		2	3
1			- Maximum Level setting.
2			- Detection setting.
3			- Wheel speed setting.

-Max Level controls the system’s maximum signal level.

For example: if this option is set to -3.0 dB, the volume control and output can not go above -3.0 dB.

-Detection sets the signal detection threshold. If the absolute value of the Left or the Right channel signal goes above this threshold the red signaling dot will be displayed on the front panel bellow the master volume display. This feature can be used to indicate signal presence on either channel or to indicate near clipping condition. To use it as signal presence indicator set Detec- tion to a value close to -90.0 dB. To use it as near clipping indicator set Detection to a value close to 0.0 dB.

-Wheel option sets the wheel sensitivity. The maximum speed is 10 and minimum speed is 1. For example if the speed is set to 1, the volume increase is slower than if set to 10. To turn the wheel off, set the speed setting to “OFF”. This setting is located one step below “1” the minimum speed.

To select/highlight an option use the “LEFT” or “RIGHT” buttons. To modify a se- lected option use the “UP” and “DOWN” buttons.

22 Tact Audio