TacT Audio S2150, M2150 owner manual Baud Rate, 57600, 9600, Remote Control, Normal

Front Panel Display
REM menu	The remote menu allows for disabling or enabling the remote control. Once the re-
(Remote)	mote control is disabled the unit can only be controlled from the front panel of the
	unit. An alternate way to enable or disable the remote control is to press the front
	panel “ANALOG” and “DIGITAL” button simultaneously - this can be used to
	change the remote control state without entering the REM menu.
	Remote Menu :			2
		REMOTE CONTROL:
						ON
			OFF		ON
				1
		1 - Remote control settings.
		2 - Active remote control setting.
	Use the “LEFT” and “RIGHT” buttons to highlight the desired option and select it
	with the “ENTER” button.

COMM menu	The communication menu allows for RS232 baud rate selection. By default the
(Communication)	2150 amplifier is set to a baud rate of 57600. However, some remote control sys-
	tems may require a baud rate of 9600. The menu also contains the option to set
	the M2150 as a master controller for a system with multiple 2150 amplifiers.
	NOTE: MASTER control is only available on the M2150.
	Communication Menu :	3

		BAUD RATE:					57600
		57600			9600		NORMAL
			1	2		4
1			- 57600 baud rate setting.
2			- 9600 baud rate setting.
3			- Active baud rate setting.
4			- Master/Normal control setting. (M2150 ONLY)
	Use the “LEFT” and “RIGHT” buttons to highlight the desired option and select it
	with the “ENTER” button.
24 Tact Audio