TacT Audio S2150 Front Panel Display, INPUT CD/Transport 17.9dB Fs=, Opt, InOut POL, Cro Trig

Main screen

MAIN menu

Saving Menu

Settings

18 Tact Audio

Front Panel Display

When the 2150 amplifier is turned ON and the system loading sequence has com- pleted, the amplifier will display the normal operating main screen.

Main Screen : 1

INPUT: CD/Transport

-17.9 dB Fs= 44.1

	2	3
1	- Name for input selection
2	- Master level in dB
3	- Input sampling frequency	indicator.

The Main menu of the M/S 2150 has three pages of general menu selections.

Main Menu :

DELAY LEVEL	ADC	<- OPT	InOut POL
CRO TRIG	DISPL->	REM	COMM ADDR ->

<- LOCK GAIN

The remote control is needed to enter the amplifiers Menu selection pages. Press the “MENU” button to enter the amplifiers menu section. Use the “LEFT” and “RIGHT” navigational buttons to highlight an option with the selection cursor and to proceed to a new page. To enter a highlighted option press the “ENTER” button. Once you are in a menu option Use the “MENU” button to go back one step (from sub-menus) or to return to the main operating screen.

Custom settings that are made to any of the menu selections may be saved by placing the M/S 2150 into standby mode. If you make changes to any of the menu items and turn the unit off before placing it into standby mode all settings will be lost. To place the M/S 2150 into standby mode press the red “STANDBY” button on the remote control.