ON/OFF
Master volume
Mute
Digital input selector
Analog input selector
Front Panel Controls
The front panel controls on the 2150 amplifier will allow you to control all of the amplifiers main features. All secondary options are controlled with menus using the remote control or the supplied software. The exclusive “TacT wheel” is the master volume control. (The wheel is only available on the M2150)
Digital Input Selector Analog Input Selector |
|
| Master Volume | Mute | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ON/OFF Switch | Input Display | Display | Volume Level |
Use the “ON/OFF” switch to toggle between ON and OFF operation. (Standby mode can be only selected only through the remote control)
The master volume is controlled by turning the large volume wheel. The green num- bers on the left side of the wheel will change as you turn the wheel - this is your master volume level indicator. (The wheel sensitivity, maximum volume and other settings can be found in the “OPT” menu.)
Use the “MUTE” button to mute or
Press the “DIGITAL” button to select the digital input. This is a toggle switch, and pressing it multiple times will toggle through all of the five digital inputs. The selected input will be displayed in the input display portion of the display screen.
Press the “ANALOG” button to select the ANALOG input. This is a toggle switch, and pressing it multiple times will toggle through all of the three analog inputs. The selected input will be displayed in the input display portion of the display screen.
NOTE: The optional ADC module is required for analog inputs.
Tact Audio 15
