TacT Audio M2150, S2150 owner manual Display Timeout OFF, Off On, Trigger Input

								Front Panel Display
TRIG menu	The trigger menu is used to control the behavior of the 2150 amplifier when a trigger
	signal is detected. When the input trigger is set to “ON” and a trigger signal is de-
	tected the amplifier will turn ON. The amplifier will stay in or switch to “STANDBY”
	mode if there is no trigger signal detected. When the input trigger is set to “OFF”
	the unit will not respond to a trigger signal however, the trigger signal will still be
	passed through the Trigger OUT terminal on the rear panel.
	TRIGGER Menu :				2
		TRIGGER INPUT:					OFF
				OFF		ON
					1
		1 - Trigger input selections.
	2		- Active trigger input setting.

Use the “LEFT” and “RIGHT” buttons to highlight the desired option and select it by pressing the “ENTER” button.

DISPL menu	The display menu controls the display Time-Out feature. This option is used to turn
(Display)	the front panel display “ON” or “OFF”. When this option is set to “ON” the front
	panel timer will turn the front display off when the front panel has not been ac-
	cessed for 10 seconds. When this option is set to “OFF” the display will remain lit
	whenever the unit is on. To wake the display, simply turn the wheel or push any
	button on either the front panel or the remote control.
	Display Menu :	2

Display Timeout OFF
		OFF ON
	1
1	- Display Timeout selections.
2	- Active Display Timeout setting.

Use the “LEFT” and “RIGHT” buttons to highlight the desired option and select it by pressing the “ENTER” button.

Tact Audio 21