MIL-BOOK™
OPERATORS MANUAL
1.5.18IrDA Port
The MIL-BOOK 1000 provides an IrDA port, on the rear panel, for connecting an IrDA-compliant device port provides wireless support for your system. You can use this port to quickly transfer large amounts of data to another IrDA-compliant system or device. This port complies with all IrDA standards.
1.5.19Replicator Port
An 80-pin replicator port is provided on the rear panel of the MIL-BOOK 1000. This port expends two SIO, two USB2.0, PIO and a VGA port. Use the replicator port to connect your MIL-BOOK 1000 into docking station. The docking station controls the power and provides connections to all of the external devices for your MIL-BOOK 1000 in one easy hook-up.
1.5.20Power Port
If the MIL-BOOK 1000 is to be in use for an long continuous period, connect the external power adater into the power port. Then plug the power cord into a 3- prong grounded wall socket to provide external power to the MIL-BOOK 1000. The power port is located on the rear panel of the MIL-BOOK 1000.
1.5.21IEEE 1394 Port
The MIL-BOOK 1000 provides a standard IEEE 1394 port for high speed connections. The “High Speed Serial Bus” is located on the right side panel, next to the audio jacks.
1.5.22Audio Connections
The MIL-BOOK 1000 comes standard with two speakers and two audio hook-up jacks. The jacks are located on the right side of the MIL-BOOK 1000, adjacent to the PCMCIA slots.
1.5.231-5.5 Battery Pack
The primary battery is Li-Ion type. The capacity of each cell is 2200mAH or more. 3.7V, 12 cells are used in one pack. The output voltage of the battery pack is 11.1VDC, so the battery pack provides 97 watts or more to the notebook computer. The battery pack connector board provides the interface between the battery cells and DC/DC board.
