TAG 1000 manual Connecting and Installing Devices

MIL-BOOK™

OPERATORS MANUAL

Figure 2-1 Opening the Notebook

2.2.3Opening the PCMCIA, FDD, CD ROM/DVD/COMBO, DVD RW Door

Open doors only when it is required to access components behind them.

To open a door:

1.Insert a small flat edged object (a small sized screwdriver or the edge of a small coin) into the slot of one of the captive screws securing the access door.

2.Turn the screw counter-clockwise until it comes loose from its socket.

3.Repeat steps 1 and 2 for each screw securing the access door.

4.Use the handle to open the access door. If the access door does not have a handle, use one of the loosened screws to pull open the door.

Figure 2-2 Opening a Door

2.2.4Closing the PCMCIA, FDD, CD ROM/DVD/COMBO, DVD RW Door

Be sure to close and secure the access doors before transporting the MIL-BOOK 1000.

1.Shut the door or put the PCMCIA/FDD/CD-ROM/DVD/COMBO/DVD RW back in place.

2.Align the door or cover securing screws with their sockets.

3.Use your finger to hold the screw in place. Insert a small flat-edged object ( a small sized screwdriver or the edge of a small coin) into the slot of one of the securing screws and turn clockwise until tight.

4.Repeat step 2 and 3 for each securing screw.

2.3Connecting and Installing Devices

This section gives instructions for installing, removing, changing, or connecting devices via the notebook external ports or sockets.

- 2-2 -