C O N N E C T I N G P H O N E S , F A X E S A N D D E V I C E S T O T A L K S W I T C H
Incoming
Phone Lines TalkSwitch Jacks E1 E2 E3 E4
CONNECTING PHONES: TWO LINE PHONE - OPTION 1
Call Handling:
TalkSwitch extensions 111 and 112 are wired to a two line phone. When a call is transferred to extension 111, line 1 on the phone will show as active; simi- larly calls on extension 112 will show line 2 as active.
Through the software, you may configure each incoming line to ring any given number of extensions, including all extensions. However, be careful if incoming line 1 is con- figured to ring both extensions 111 and 112. An incoming call will ring both phone lines at the same time. Instead configure incoming line 1 to ring extension 111, and
line 2 to ring extensions 112.
Extensions 111 and 112
Two line phones must have these two phone jacks labeled “L1/L2” and “L2”. The jack labeled “L1/L2” will have 4 pin connectors and the “L2” jack will have 2 pin connectors.
L1OORLL1/L2/L
To Tel. Line L1 or L1/L2
To Tel. Line L2
L2
Ext 111
To Jack E1
Each phone is connected to a single line
Single Line
Ext 112 | Pin 1 |
| |
To Jack E2 | Pin 2 |
|
W W W.T A L K S W I T C H . C O M | 5 |
