Structure of the additional commands Additional commands (Printer)
176 T5023/5023+ - Programming Guide
Transfer of user data
The transfer of MSR data is archived by adding an STX... ETX sequence to the
respective CSI command:
CSI ... I F STX...ETX
Reaction to incorrect parameters
Normally an additional command is ignored if non- decimal parameters or para-
meters exceeding the specified value range are transferred. This also applies if
the set format height is infringed by the verticalpositioning. Exceptions to these
rules are given with the descriptionof the appropriate command, as appropriate.
Responses
Responses of the document printer can be grouped as follows:
– Requested data response
– Global printer status (GPS)
– Special printer message (SPM).
Meaning Value Remarks
STX
ETX
Startoftext
End of text
02 (ASCII)
03 (ASCII)
for example, start data
from OCR reader
for example, end of a
message from the printer