Encryptions/Codes Programming interface (General)
16 T5023/5023+ - Programming Guide
Activating the document printer functions
Thecontrol codes or ESC or CSI sequences must be addressed to the printer directly
and uniquely via correspondingprogram commands. Depending on the respective
programming language,this is, e. g., via PRINT or WRITE instructions.
Example:
Three lines are to be printed. Lines 1 and 3 are printed in normal print,line 2 in
italic print.
Pseudo code:
Conversion into BASIC:
Result:
BEGIN
PRINTLF(" first line")
PRINT(ESC 4)
PRINTLF(" second line")
PRINT(ESC 5)
PRINTLF(" third line")
END
10 LPRINT "first line"
20 LPRINT CHR$(27);" 4";
30 LPRINT "second line"
40 LPRINT CHR$(27);" 5";
50 LPRINT "third line"
In this manual the program examples are depicted exclusively in the
form of a pseudo code and the control codes or code series are given
in decimal ASCII encryption or directly as characters. The correspon-
ding information must then be converted into the appropriate pro-
gramming language.
i