E.11
E
Note that the IPX/SPX protocol must be enabled in the Netware
menu before you can configure frame types. See “Setting
Network Protocols” on page E.7.
Take the following steps to change the frame type format:
1Press the Menu button ( ) until you see “Network” on the
bottom line of the display. Press the Enter button ( ) to
access the menu.
2Press the Enter button ( ) when “Config Network”
displays on the bottom line.
3Press the scroll button ( or ) to display “Yes” on the
bottom line. Press the Enter button ( ).
4Press the Upper Level button ( ).
5Press the scroll button ( or ) until “Netware” displays
on bottom line. Press the Enter button ( ).
6Press the Enter button ( ) when “On” displays.
7press the Upper Level button ( ), then use the scroll
button ( ).
8Press the Enter button ( ) when “Config Netware”
displays.