USING THE CONTROL PANEL
3.16
PCL Menu
This menu sets the PCL emulation configuration. You can set the
font type, symbol type, lines per page, and point size.
(*: the default setting)
Item Explanation
TYPEFACE
You can select the standard font to be used
in PCL emulation.
• PCL1~PCL7’s are fixed pitch, and
PCL8~PCL45’s are proportional fonts. You
can adjust the font size of PCL1~PCL7
using the Pitch item, and PCL8~PCL45
can do using Point Size item (see
page 3.17).
• PCL46~PCL54’s pitch and point size are
fixed.
SYMBOL
This item selects the symbol to be used in
PCL emulation. The symbol is the group of
numbers, marks, and special signs being
used when printing letters.
LINES
Sets the number of printable lines from 5 to
128 lines for the default paper size. The lines
may differ according to the paper size and
printing orientation.
PITCH
When you select one between PCL1 and
PCL7 from the Typeface menu, you can
determine the font size by setting the
number of characters that will print in one
inch. The default value, 10 is the
recommended size.
Values: PCL1* ~ PCL54
Values: ROMAN8 ~ PCCYRIL *PC8
Values: 5 ~ 128 *60 (Letter), 64 (A4)
Values: 0.44 ~ 99.99 (0.01 unit) *10