2.12 SETTING UP YOUR PRINTER

For Network Printing

If you have installed the optional network card, you can use your
printer over the network by using an Ethernet cable(UTP cable
with RJ.45 connector) or wireless LAN interface, depending on
the type of the network card. For details about installing the
card, see page F.6.

Using an Ethernet Cable

1Make sure that both the printer and the computer are
turned off.
2Plug one end of the Ethernet cable into the Ethernet
network port on the Printer.
3Plug the other end of the cable into a network LAN
connection.
See your computer User’s Guide, if you need help.

Using a Network Antenna

1Screw the wireless network antenna counterclockwise into
the port.
To the network LAN connection