F.4
3Locate the PS/Barcode DIMM slot (the upper slot) and the
memory DIMM slot (the lower slot) on the control board.
They are not interchangeable.
To install the PS/Barcode DIMM, continue with Step 4.
To install the memory DIMM, go to Step 5.
4Hold the PS/Barcode DIMM so that the PS/Barcode DIMM
notch and the connection point are aligned with the slot as
shown, and insert it all the way into the upper slot labelled
“ROM DIMM” at a 90 degrees angle.
5Hold the memory DIMM so that the notch and the
connection point are aligned with the slot as shown, and
insert it all the way into the lower slot labelled “RAM DIMM”
at a 90 degrees angle.
PS/
Memory DIMM