USING THE CONTROL PANEL 3.19
3
3

Network Menu

This menu lets you set the network interface card’s configuration .
(*: the default setting)
Item Explanation
CONFIG NETWORK
Set whether or not you want to configure
network values.
If you select Yes, you can configure
TCP/IP,AppleTalk and Netware menu.
CONFIG TCP
Select whether you want to set the IP
address item or not.
If you select Yes, you can configure IP
address item.
IP GET METHOD
You can set this item only when you set
Config TCP to Yes.
Static:You can enter IP address,
subnetmask, and gateway manually.
BOOTP:The BOOTP server allots the IP
address to you automatically.
DHCP: The DHCP server allots the IP
address to you automatically.
IP ADDRESS
You can select this item only when you
set IP Get Method to Static. This item
lets you enter the IP address manually.
Press the scroll button to set the value of
the 1st byte between 0 and 255, and
then press the Enter button.
For the 2nd to the 4th byte, you can set
the value in the same way.
Values: Yes, No*
Values: Yes, No*
Values: Static*, BOOTP, DHCP