Administrator Settings
151
4.3.9 VNC Settings
VNC Settings is necessary when using a VNC presentation. See chapter PC Soft Presenter and
VNC for more information on how to use VNC.
Address The IP-address of the PC with the VNC software installed. To find the IP-
address of the PC, place the mouse pointer on the V NC program icon in the
lower right corner of the Windows taskbar. You can also select Command
Prompt from the Startup-menu\Run and type cmd then enter. This will open a
command windo w and from here. Type “ipconfig” and press enter.
Display
Number
The display number for VNC is 0 and upwards. If you are using WinVNC,
double-click on the icon on the taskbar to view WinVNC prope rties. This
number should correspond with Display Number in this menu.
Password
Enter the same password as specified in WinVNC properties. The password
will be shown as asterisk signs (*) the next time you enter the menu.