TANDBERG 8000 MXP
10
2 Installation
Precautions:
Never install communi cation wiring during a lightnin g storm.
Never install ja c ks for communicati on c ables in wet locatio ns unless the jack is
specifically designed for wet locations.
Never touch uninstalled co mmunication wires or terminals unless the telephone line has
been disconnected at the network inte rface.
Use caution when installing or modifying communication lines.
Avoid using communication equipment (other than a cordless type) during an electrical
storm. There may be a remote risk of electri cal sh ock from lightning.
Do not use the communica tion equipment to report a gas leak in the vicinity of the leak.
Always connect the product to an earthed socket outlet.
The socket outlet shall be installed nea r to the equipment and shall be easily accessible.
Never install cables without first switching the power OFF.
1TR6 network type is not approved for connection directly to the telecommunications
network. This network type is only to be used behind a PABX.
X.21 network type is not approved for connection directly to the telecommunications
network. This network type is only to be used together with already approved equ ipment,
and is not meant for direct connections to the telecom m unication networks.
V.35/RS-449/RS-366 network type is no t approved for connection directly to the
telecommunications network. This network type is only to be used together with already
approved equipment, and is not intended for direct connection to the telecommunication
networks.
This product complies with directives: LVD 73/23/EC, EMC 89/366/EEC, R&TTE 99/5/EEC