Installation
5
Monitors
The main monitor displays the far-end and nea r-end videoconferencing sites in addition to the
menus and video from con nected video sources. The secon d monitor displays selfview,
Snapshots and Duo Video.
Codec
The codec is the heart of the system . Its main task is the compression of outgoi ng video, audio
and data, the transmission of this information to the far end and the decompression of the
incoming information - the name code c comes from a combination of the two words compre ssion
and decompression.
Remote Control
The remote control is used to control all functions of the system. If the screen saver is activated
(black monitor), touching the remote control will autom atically wake up the system. The remote
control uses 4 AAA batteries. The system will tell you when batteries are running low. Change the
batteries at the back of the remote control.
The reach of the remote control signal is 20 meters. For users sitting in an open plan office, this
can cause problems. Use the little, white switch placed under the batteries to change the reach of
the signal from 20 meters to 2 meters. This will prevent you from unintentionally controlling
another video system, when you control your own system.