TANDBERG 8000 MXP

Remember that there should be a gap on each side of the monitor.

Be careful when removing the plastic film. Do not pull the plastic off the monitor at a 90º

angle as this may damage the screen. Instead you should remove the plastic film by pulling

it parallel with the screen at a 180º angle .

Installing the camera

Take the camera and rem ove the plastic backing from the double-sided pads on the base of the

unit. Place the camera centrally on top of the monitor, in line with the front of the screen. The

camera should be align ed with the front edge of the monitor to ensure that the IR-sen sor in the

camera can pick u p signals from the remote control.