TANDBERG 8000 MXP
222
Supported DVI cables:
TANDBERG supports DVI-D Single -Lin k , DVI-A and DVI-I Single-Link format cables.
DVI-D cables transmit digital T.M.D.S. signal s, DVI-A cables transmit analog VGA signals and
DVI-I cables can transmit either digital or analog signals.
It is possible to extend existing DVI cables by the use of extension cables. The maximum cable
length however, is 5 meters. Going beyond that may result in quality loss.
Pin Signal
Assignment Pin Signal
Assignment Pin Signal
Assignment
1 T.M.D.S.
Data2- 9 T.M.D.S.
Data1- 17 T.M.D.S. Data0-
2 T.M.D.S.
Data2+ 10 T.M.D.S.
Data1+ 18 T.M.D.S. Data0+
3 T.M.D.S.
Data2/4 Shield 11 T.M.D.S.
Data1/3 Shield 19 T.M.D.S.
Data0/5 Shield
4 T.M.D.S.
Data4- 12 T.M.D.S.
Data3- 20 T.M.D.S. Data5-
5 T.M.D.S.
Data4+ 13 T.M.D.S.
Data3+ 21 T.M.D.S. Data5+
6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock
Shield
7 DDC Data 15 Ground (return
for +5V, HSync
and VSync)
23 T.M.D.S. Clock+
8 Analog Vertical
Sync 16 Hot Plug Detect 24 T.M.D.S. Clock-
C1 Analog Red C2 Analog Green C3 Analog Blue
C4 Analog
Horizontal
Sync
C5 Analog Ground
(analog, R, G &
B return)
DVI-I - Combined Analog a nd Digital Connector Pin Assignm ents.
The TANDBERG Profile systems are shipped with a PC cable with integrated audio:
DVI-A Plug + 2*RCA Plug to VGA Plug + 3.5mm Stereo Plug, length 5m.