JBL AV1 manual Mode Adjust, Music, Option/Parameter, Default Setting, Possible Settings

Mode Adjust JBL Performance

The table at the bottom of the previous page indicates the con- ditions in which THX Ultra2 and DTS-ES decoding are engaged.

•THX Ultra2 decoding is engaged when the ES DECODING parameter is set to OFF, or the ES DECODING parameter is set to AUTO and a 5.1-channel DTS source is detected.

•DTS-ES decoding is engaged when the ES DECODING parameter is set to ON, or the ES DECODING parameter is set to AUTO and a 5.1-channel matrix-encoded or 6.1-channel discrete-encoded DTS-ES source is detected.

•Listening mode name differs depending on the encoding present in the input source, the ES DECODING parameter set- ting and the speaker setup.

–The DTS THX ULTRA2 listening mode is available when THX Ultra2 decoding is engaged.

–The DTS-ES THX listening mode is available when DTS-ES decoding is engaged.

–The DTS THX ULTRA2 and DTS(-ES) THX listening modes cannot be activated unless side and rear speakers are present.

MUSIC

MODE ADJUST MUSIC

•Designed for playback of 5.1-channel DTS music sources.

•The DTS THX MUSIC listening mode cannot be activated unless side and rear speakers are present.

•ASA processing is applied to signals sent to the rear speakers. Refer to the ASA parameter description on page 3-32 for more information.

•Recommended for home theaters with THX-certified speaker setups.

Option/Parameter	Default Setting	Possible Settings
LFE MIX	+0.0dB	-10.0dB to +0.0dB
OUTPUT LEVELS	--	--
CUSTOM	--	--

See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29for detailed descriptions.

Note:

The DTS THX MUSIC listening mode can only be activated with the front-panel or remote control Mode and buttons.

5-26