JBL AV1 manual Audio Controls, Default, Possible, Parameter, Value, Settings

Audio Controls JBL Performance

AUDIO CONTROLS

Selecting the MAIN MENU AUDIO CONTROLS option opens the AUDIO CONTROLS menu, which can be used to customize the audio output connectors. These parameter settings affect all inputs and listening modes selected, except the 5.1a BYPASS and 2CH BYPASS listening modes.

MAIN MENU

MODE ADJUST

AUDIO CONTROLS

SETUP

AUDIO CONTROLS

BASS+0.0dB

TREBLE +0.0dB

TILT EQ +0.0dB

LOUDNESS OFF

BALANCE<I>

FADER<I>

-6.0 to +6.0dB

Default	Possible
Parameter	Value	Settings
BASS	+0.0dB	-6.0dB to +6.0dB
TREBLE	+0.0dB	-6.0dB to +6.0dB
TILT EQ	+0.0dB	-3.0dB to +3.0dB
LOUDNESS	OFF	ON, OFF
BALANCE	<>	L< to <> to >R
FADER	<>	B< to <> to >F

AUDIO CONTROLS menu parameter descriptions begin in the next column.

Note:

Pressing and holding the S2 button while pressing and releasing the Blue button sets the BASS, TREBLE, and TILT EQ parameters to +0.0dB.

BASS -6.0dB to +6.0dB

AUDIO CONTROLS BASS

Controls the amount of low-frequency boost or cut applied to the audio output connectors labeled Front L/R, Center and Subwoofer. The graph shown on the left of the next page illustrates the fre- quency response of BASS parameter settings.

TREBLE -6.0dB to +6.0dB

AUDIO CONTROLS TREBLE

Controls the amount of boost or cut applied to the audio output connectors labeled Front L/R and Center. The Treble parameter set- tings graph on the next page illustrates the frequency response of TREBLE parameter settings.

4-2