JBL AV1 manual Setup, THX SPEAKER SETUPS continued, Rear L/R, THX 80HZ, NONE, 3-34

Setup JBL Performance

THX SPEAKER SETUPS (continued)

MAIN MENU

MODE ADJUST AUDIO CONTROLS

SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

SPEAKER SETUP

CUSTOM SETUP THX SETUP SPEAKER DISTANCES LEVELS CALIBRATION

R SR RR

40Hz 60Hz 60Hz

	C
	60Hz
M	L	SL	RL
SUB
40Hz	40Hz	60Hz	60Hz

THX SPEAKER SETUP

!CAUTION!

PRESSING THE

BUTTON WILL

AUTOMATICALLY CHANGE THE OUTPUTS TO A THX SPEAKER CONFIGURATION

THX SETUP

FRONT L/R*		40 Hz
CENTER*		60 Hz
SIDE L/R*		60 Hz
REAR L/R		60 Hz
SUBWOOFER*		40 Hz
	ULTRA2 SUB OFF
BGC		N/A
ASA		APART

*These parameters cannot be adjusted.

THX REAR SPEAKERS

THX 80Hz

NONE

REAR L/R THX 80HZ, NONE

SETUP SPEAKERS THX SETUP REAR L/R

Opens the THX REAR SPEAKERS menu, which is used to activate and deactivate the audio output connectors labeled Rear L/R. When set to THX 80Hz, the AV1 activates these connectors and configures all audio output connectors for a 7.1-channel THX speaker setup. When set to NONE, the AV1 deactivates these connectors and con- figures the other audio output connectors for a 5.1-channel THX speaker setup.

Note:

When the REAR L/R parameter is set to NONE, Dolby Digital Surround EX, THX Ultra2, THX Surround EX and DTS-ES decoding are not available, and the ASA parameter is unavailable.

The THX SETUP menu THX ULTRA2 SUB, BGC and ASA parameters are identical to the CUSTOM SETUP menu THX ULTRA2 SUB, BGC and ASA parameters. When one of these parameter settings is adjusted on one menu, it is automatically adjusted on the other menu at the same time. See pages “THX ULTRA2 SUB”, “BGC” and “ASA” on page 3-32 for these parameter descriptions.

3-34