JBL AV1 manual Rear-Paneloverview, Ac Input Connector, Basic Operation, Power Switch

Basic Operation JBL Performance

REAR-PANEL OVERVIEW

The numbers in the rear-panel illustration correspond with the numbered items below.

8 3 6 7 1

10	9	4	5	2
1 POWER SWITCH			3 DIGITAL AUDIO INPUT CONNECTORS (S/PDIF)

Use the Power switch to power the AV1 on or off. The I and O posi- tions represent "on" and "off" status respectively. When the AV1 is powered on, the front-panel Standby button or remote control On button can be used to activate and deactivate standby mode. When the AV1 is powered off, standby mode is not available.

Provide digital audio input. Four S/PDIF coaxial and four S/PDIF optical (Toslink) input connectors are available. Connectors are compatible with PCM (44.1kHz, 48kHz, 88.2kHz and 96kHz), Dolby Digital and DTS(-ES) sources. Connectors are not compatible with MPEG (MP3) sources.

2 AC INPUT CONNECTOR

Provides power to the AV1 through the supplied power cord (3 wire, 10 amp, IEC 320).

Caution!

Never make or break connections to the AV1 unless all associated components are powered off.

2-4