JBL AV1 manual Appendix, Specifications, Audio Input & Output Connectors, Audio Performance

Appendix JBL Performance

SPECIFICATIONS

Audio Input & Output Connectors

Analog Audio Inputs	8 stereo (RCA) or 5 stereo and one 5.1-channel or 2 stereo
	and two 5.1-channel connectors
Digital Audio Inputs	•	4 S/PDIF coaxial (RCA) and 4 S/PDIF optical (TosLink)
		connectors
	•	Coaxial and optical input connectors conform to IEC-
		958, S/PDIF standards
	•	Accepts 44.1, 48, 88.2 and 96kHz sample rates
	•	Accepts 16-24 bits PCM audio, Dolby Digital, DTS and
		DTS-ES discrete data formats
Audio Outputs	8 unbalanced (RCA) connectors for Front L/R, Center,
	Subwoofer, Side L/R, and Rear L/R

Audio Performance

A/D Conversion	24-bit, 96kHz, dual-bit ∆Σ architecture
D/A Conversion	24-bit, 44.1 to 192kHz, multi-bit ∆Σ architecture
Frequency Response	10Hz to 20kHz, +0.05dB/-0.1dB, -0.5dB at 40kHz, reference
	1kHz
THD + Noise	Below 0.008% at 1kHz, maximum output level
Dynamic Range	108dB minimum, 22kHz bandwidth
Signal-to-Noise Ratio	108dB minimum, 22kHz bandwidth
Input Sensitivity	200mVrms (2Vrms for maximum output level) at 0dB input
	gain
Input Impedance	100kΩ in parallel with 150pF
Output Level	• 150mVrms typical, 6Vrms maximum
	• Maximum value with full-scale input signal and volume at
	+12dB
Output Impedance	100Ω in parallel with 150pF

Video Input & Output Connectors

Video Inputs	5 composite (RCA), 5 S-video, and 3 component video (RCA)
Video Outputs	1 composite (RCA), 1 S-video, and 1 component (RCA)

Composite & S-video Performance

Compatibility	NTSC, PAL, and SECAM
Switching	Active
Output Level	1.0V peak-to-peak
Impedance	Ω
	75
Input Return Loss	>40dB
Differential Gain	<0.5%
Differential Phase	<0.5°
Bandwidth	>25MHz
K Factor	<0.3%
Gain	±0.15dB
Signal-to-Noise Ratio	>65dB
Frequency Response	10Hz to 10MHz + 0.1/-0.3dB

A-2