JBL AV1 manual Pl +, Mode Adjust, Option/Parameter, Default Setting, Possible Settings

Mode Adjust JBL Performance

PL +

MODE ADJUST PL +

•Designed for playback of Dolby Surround-encoded sources.

•Decodes four channels from Dolby Surround-encoded sources.

•Uses a mono surround channel with a high-frequency rolloff above 7kHz.

•Applies THX re-equalization to simulate high-frequency rolloffs that occur in movie theaters. Most films are mixed for movie theaters, and might sound too bright when played back in home theaters without re-equalization.

•Applies THX timbre matching to minimize timbre differences between the front and surround channels, which results in smoother sound movements between them.

•Recommended for home theaters with THX-certified speaker setups.

Option/Parameter	Default Setting	Possible Settings
RE-EQUALIZER	ON	ON, OFF
OUTPUT LEVELS	--	--
CUSTOM	--	--

See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29for detailed descriptions.

CIN

MODE ADJUST CIN

•Designed for playback of matrix-encoded digital stereo film sources.

•Derives six channels when both side and rear speakers are present (rear channels will be in parallel). Derives five chan- nels when only side or rear speakers are present. The sub- woofer channel is generated through bass management in the AV1.

Option/Parameter

OUTPUT LEVELS

CUSTOM

See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29for detailed descriptions.

5-8