JBL AV1 manual Setup, CUSTOM SPEAKER SETUPS continued, Side L/R

Setup JBL Performance

CUSTOM SPEAKER SETUPS (continued)

MAIN MENU

MODE ADJUST AUDIO CONTROLS

SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

SPEAKER SETUP

CUSTOM SETUP THX SETUP SPEAKER DISTANCES LEVELS CALIBRATION

R SR RR

40Hz 60Hz 60Hz

	C
	60Hz
M	L	SL	RL
SUB
40Hz	40Hz	60Hz	60Hz

CUSTOM SETUP

FRONT L/R		40 Hz
CENTER		60 Hz
SIDE L/R		60 Hz
REAR L/R		60 Hz
SUBWOOFER		40 Hz
	ULTRA2 SUB	OFF
BGC		N/A
ASA		APART

SIDE L/R SPEAKERS

FULL

30Hz

40Hz

50Hz

60Hz

70Hz

80Hz 80 Hz

90Hz

100Hz

110Hz

120Hz

SIDE L/R FULL, 30Hz TO 120Hz, THX 80Hz, NONE

SETUP SPEAKERS CUSTOM SETUP SIDE L/R

Opens the SIDE L/R SPEAKERS menu, which is used to select a crossover point for the audio output connectors labeled Side L/R. When set to FULL, the AV1 sends a full-range audio output signal to these connectors. Otherwise, the AV1 activates a crossover point at the selected setting. Choose the setting closest to the low-fre- quency rating of associated speakers.

When set to NONE, the AV1 redirects side channel signals to the audio output connectors labeled Rear L/R. If the CUSTOM SETUP menu REAR L/R parameter is also set to NONE, the AV1 redirects surround channel signals to the audio output connectors labeled Front L/R.

Note:

When the SIDE L/R parameter is set to NONE, Dolby Digital Surround EX, THX Ultra2, THX Surround EX and DTS-ES decoding are not available.

3-28