Troubleshooting & Maintenance | JBL Performance |
RESTORING FACTORY-DEFAULT SETTINGS
When
To restore factory-default settings:
1.Record all
2.If the AV1 is powered on, press the front panel Standby but- ton or the remote control Off button to activate standby mode and deactivate the AV1. If the AV1 is in standby mode, proceed to step 3.
3.Press the front panel Standby button or the remote control On button to deactivate standby mode and activate the AV1.
4.Quickly press and hold the front panel or remote control Mute button until the FACTORY SETTINGS menu shown below opens on the
FACTORY SETTINGS
EXIT
RESTORE DEFAULTS
The Mute button must be pressed within 2 seconds of activat- ing the AV1. If the message "MUTE ON" appears on the on- screen and front panel displays when the Mute button is pressed, too much time has passed. If this occurs, begin again with step 2.
5. Press the remote control and arrows to highlight the desired option. Highlight the RESTORE DEFAULTS option to restore
6. When the desired option is highlighted, press the arrow to select this option.
• If the RESTORE DEFAULTS option was selected, the FAC- TORY SETTINGS message shown below appears on the on- screen and front panel displays. When this message appears, press a front panel or remote control button to restart the AV1.
FACTORY SETTINGS |
| FACTORY SETTINGS |
|
EXIT |
| HAVE BEEN RESTORED |
|
RESTORE DEFAULTS |
| PRESS ANY KEY |
|
|
| TO RESTART |
|
|
| ||
|
|
|
|
•If the EXIT option is selected, the FACTORY SETTINGS menu will close and the