JBL AV1 manual Trigger Setup, Default, Possible, Parameter, Settings

Setup JBL Performance

TRIGGER SETUP

SETUP TRIGGER

Selecting the SETUP menu TRIGGER option opens the TRIGGER SETUP menu, which is used to configure the programmable trigger output (Trigger 1) in the 5-pin DIN connector located on the back panel. The 5-pin DIN connector provides 12VDC outputs for externally controlling compatible components. The Power Trigger pin cannot be configured and is active when the AV1 is active (not in Standby). The Trigger 1 output pin can be configured for remote or programmed operation. The Trigger 2 output cannot be configured, but provides an output voltage that is opposite that of the Trigger 1 output pin. If Trigger 1 is ON (at 12VDC), Trigger 2 is at ground potential. If Trigger 1 is OFF (at ground), Trigger 2 is at 12VDC.

	Default	Possible
Parameter	Setting	Settings
REMOTE ONLY	ON	ON, OFF
Program Operation	OFF	ON, OFF

All TRIGGER SETUP menu parameters – except the REMOTE ONLY parameter – are considered program operation parameters.

MAIN MENU

MODE ADJUST AUDIO CONTROLS

SETUP

Power Trigger

Trigger 1

SETUP

INPUTS SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS

TRIGGER

LOCK OPTIONS

Ground

Trigger 2

Ground

TRIGGER SETUP

REMOTE ONLY				ON
DVD1				OFF
DVD2				OFF
SAT				OFF
VCR				OFF
TV				OFF
CD				OFF
TUNER				OFF
AUX				OFF
	FILM			OFF
	TV			OFF
	MUSIC			OFF
	MUSIC SURR			OFF
	PLII MOVIE			OFF
	PLII MUSIC			OFF
	PLII +			OFF
	PRO LOGIC			OFF
	PL +			OFF
			CIN	OFF
			MUSIC	OFF
			+	OFF
NIGHTCLUB				OFF
CONCERT HALL				OFF
CHURCH				OFF
CATHEDRAL				OFF
PANORAMA				OFF
PARTY				OFF
2-CHANNEL				OFF
MONO LOGIC				OFF
MONO SURROUND				OFF
MONO				OFF
5.1		FILM		OFF
5.1 TV				OFF

ON

OFF

*TRIGGER SETUP menu listening mode names are fixed, meaning these names do not change when certain encoding is present. For instance, the 5.1 THX SurEX listening mode label appears whether THX Ultra2,

THX Surround EX, or no enc o ding is engaged.

REMOTE ONLY ON, OFF

SETUP TRIGGER REMOTE ONLY

Configures Trigger 1 for remote operation. When ON, Trigger 1 is configured for remote operation. Pressing and holding the S1 button while pressing and releasing the OSD button activates the connector. Pressing and holding the S1 button while pressing and releasing the Blue button deactivates the connector. The AV1 ignores all other TRIGGER SETUP menu parameter settings. When OFF, Trigger 1 is not configured for remote operation. It can be configured for program operation.

5.1			MUSIC			OFF
		SurEX				OFF
		MUSIC				OFF
	DIGITAL EX					OFF
5.1 2-CHANNEL						OFF
5.1 MONO LOGIC						OFF
5.1 MONO SURR						OFF
5.1 MONO						OFF
					FILM	OFF
					MUSIC	OFF
						OFF
					MUSIC	OFF
				2-CHAN		OFF
						OFF
5.1a BYPASS						OFF
2CH BYPASS						OFF

3-52