JBL AV1 manual Mode Adjust, Music, Option/Parameter, Default Setting, Possible Settings

AV1 Mode Adjust

MUSIC

MODE ADJUST MUSIC

•Designed for playback of matrix-encoded digital stereo music sources.

•Derives six channels when both side and rear speakers are present (rear channels will be in parallel). Derives five channels when only side or rear speakers are present. The subwoofer channel is generated through bass management in the AV1.

Option/Parameter

OUTPUT LEVELS

CUSTOM

See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29for detailed descriptions.

Please note the following about DTS Neo:6 listening mode activation:

•The DTS Neo:6 listening modes cannot be assigned as the preferred listening mode for 2-channel sources. However, when the 2-CH parameter is set to USE LAST, the AV1 will automatically activate a DTS Neo:6 listening mode if a DTS Neo:6 listening mode was activated the last time a 2-channel source was present.

•The AV1 will not automatically activate the DTS Neo:6 lis- tening modes unless a 44.1kHz or 48kHz PCM digital source is present. The DTS Neo:6 listening modes are not available with 88.2kHz or 96kHz, Dolby Digital, or analog sources.

•The DTS Neo:6 MUSIC listening mode can be activated with

the front-panel or remote control Mode and buttons. The DTS Neo:6 CIN listening mode can also be activated with the remote control DTS button when a 2-channel input source is present.

+

MODE ADJUST +

•Designed for playback of matrix-encoded digital stereo film sources.

•Applies THX re-equalization to simulate high-frequency rolloffs that occur in movie theaters. Most films are mixed for movie theaters, and might sound too bright when played back in home theaters without re-equalization.

Option/Parameter	Default Setting	Possible Settings
RE-EQUALIZER	ON	ON, OFF
OUTPUT LEVELS	--	--
CUSTOM	--	--

See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29for detailed descriptions.

5-9