JBL AV1 manual Setup, Center

AV1 Setup

MAIN MENU

MODE ADJUST AUDIO CONTROLS

SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

SPEAKER SETUP

CUSTOM SETUP THX SETUP SPEAKER DISTANCES LEVELS CALIBRATION

R SR RR

40Hz 60Hz 60Hz

	C
	60Hz
M	L	SL	RL
SUB
40Hz	40Hz	60Hz	60Hz

CUSTOM SETUP

FRONT L/R		40 Hz
CENTER		60 Hz
SIDE L/R		60 Hz
REAR L/R		60 Hz
SUBWOOFER		40 Hz
	ULTRA2 SUB OFF
BGC		N/A
ASA		APART

CENTER SPEAKER

FULL

30Hz

40Hz

50Hz

60Hz

70Hz

80Hz 80 Hz

90Hz

100Hz

110Hz

120Hz

CENTER FULL, 30Hz TO 120Hz, THX 80Hz, NONE

SETUP SPEAKERS CUSTOM SETUP CENTER

Opens the CENTER SPEAKER menu, which is used to select a cross- over point for the audio output connector labeled Center. When set to FULL, the AV1 sends a full-range audio output signal to this con- nector. Otherwise, the AV1 activates a crossover point at the selected setting. Choose the setting closest to the low-frequency rating of the associated speaker. When set to NONE, the AV1 redi- rects center channel signals to the audio output connectors labeled Front L/R.

Note:

When the CENTER parameter is set to NONE, center channel signals will not be redirected if the 5.1a BYPASS listening mode is activated. To redi- rect center channel signals, configure the speaker setup with the associ- ated DVD-A/SACD player.

3-27