JBL AV1 manual Setup, Background, Remote State

AV1 Setup

MAIN MENU

MODE ADJUST AUDIO CONTROLS

SETUP

SETUP

INPUTS SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

DISPLAY SETUP

ON-SCREEN DISPLAY FRONT PANEL DISPLAY

A/V SYNC DELAY	OFF
CUSTOM NAME	OFF

EDIT CUSTOM NAME

ON-SCREEN DISPLAY

STATUS	2 SECONDS
POSITION		TOP
FORMAT		NTSC
BACKGROUND		ON
REMOTE STATE		ON

ON

OFF

BACKGROUND ON, OFF

SETUP DISPLAYS ON-SCREEN DISPLAY BACK GROUND

Activates and deactivates the menu background. When ON, on- screen display menus appear over a solid blue or gray background (depending on the display device). When OFF, on-screen display menus appear over the video input signal.

Note:

When the BACKGROUND parameter is OFF, the on-screen display disap- pears if the display device is using the component video output connector.

REMOTE STATE ON, OFF

SETUP DISPLAYS ON-SCREEN DISPLAY REMOTE STATE

Controls the remote control command bank indicator that appears on the on-screen display. When ON, a command bank indicator appears in the top-right corner of the on-screen display indicating the last command bank from which the AV1 received a command. When OFF, no command bank indicator appears in the on-screen display.

A 1 appears when a command from the Shift 1 command bank was received last. An 2 appears when a command from the Shift 2 com- mand bank was received last. No letter appears when a command from the default command bank was received last.

3-49