JBL AV1 manual Setup, CUSTOM SPEAKER SETUPS continued, Subwoofer

Setup JBL Performance

CUSTOM SPEAKER SETUPS (continued)

MAIN MENU

MODE ADJUST AUDIO CONTROLS

SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

SPEAKER SETUP

CUSTOM SETUP THX SETUP SPEAKER DISTANCES LEVELS CALIBRATION

R SR RR

40Hz 60Hz 60Hz

	C
	60Hz
M	L	SL	RL
SUB
40Hz	40Hz	60Hz	60Hz

CUSTOM SETUP

FRONT L/R		40 Hz
CENTER		60 Hz
SIDE L/R		60 Hz
REAR L/R		60 Hz
SUBWOOFER		40 Hz
	ULTRA2 SUB OFF
BGC		N/A
ASA		APART

SUBWOOFER

FULL

30Hz

40Hz

50Hz

60Hz

70Hz

80Hz 80 Hz

90Hz

100Hz

110Hz

120Hz

SUBWOOFER FULL, 30HZ to 120Hz, THX 80Hz, NONE

SETUP SPEAKERS CUSTOM SETUP SUBWOOFER

Opens the SUBWOOFER menu, which is use to select a crossover point for the audio output connector labeled Subwoofer. When set to FULL, the AV1 sends a full-range audio output signal to this con- nector. Otherwise, the AV1 activates a crossover point at the selected setting. Choose the setting equal to the lowest setting of the other speakers.

Note:

When the SUBWOOFER parameter is set to NONE, subwoofer signals will not be redirected if the 5.1a BYPASS listening mode is activated. Use the associated DVD-A/SACD player to configure the speaker setup to redirect subwoofer signals .

3-30