JBL AV1 manual Rear Panel Config, Setup, Stereo Inputs, 5 ST. & 1 5.1 ANLG

AV1 Setup

REAR PANEL CONFIG

SETUP REAR PANEL CONFIG

Selecting the SETUP menu REAR PANEL CONFIG option opens the REAR PANEL CONFIG menu, which is used to configure the analog audio input connectors as eight stereo connectors, one 5.1-channel and five stereo connectors or two 5.1-channel and two stereo connectors.

MAIN MENU

MODE ADJUST AUDIO CONTROLS

SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

REAR PANEL CONFIG

8 STEREO INPUTS

OR

5 ST. & (1) 5.1 ANLG OR

2 ST. & (2) 5.1 ANLG

8 STEREO INPUTS

SETUP REAR PANEL CONFIG 8 STEREO INPUTS

Configures the analog audio input connectors as eight stereo con- nectors, (the factory-default configuration).

When the analog audio input connectors are configured as eight stereo connectors:

•All connectors are configured as stereo connectors.

•Neither of the 5.1-channel connectors is available. Sources assigned to the 5.1-channel connectors are reassigned to the corresponding stereo connectors.

5 ST. & (1) 5.1 ANLG

SETUP REAR PANEL CONFIG 5 ST. & (1) 5.1 ANLG

Configures the analog audio input connectors as five stereo and one 5.1-channel connectors.

When the analog audio input connectors are configured as five stereo and one 5.1-channel connectors:

•The connectors labeled 1, 2, 3, 4 and 5 are configured as stereo connectors.

•The connectors labeled 6, 7 and 8 are configured as a 5.1- channel connector. This connector is sent to the audio output connectors as indicated in the table on the next page.

3-43