JBL AV1 Decoding, Mode Adjust, Input Source, Parameter Setting, ChannelDTS, Matrix-Encoded DTS-ES

AV1 Mode Adjust

DECODING

The table below indicates the conditions in which DTS-ES decoding is engaged.

•DTS-ES decoding is engaged when the ES DECODING parameter is set to ON, or the ES DECODING parameter is set to AUTO and a 5.1-channel matrix-encoded or 6.1-channel discrete-encoded DTS-ES source is detected.

•DTS-ES decoding is not engaged when the ES DECODING parameter is set to OFF, or the ES DECODING parameter is set to AUTO and a 5.1-channel DTS source is detected.

•Listening mode names differ depending on the encoding present in the input source, the ES DECODING parameter Setting and the speaker setup.

–DTS-ES listening modes are available when DTS-ES decod- ing is engaged.

–DTS listening modes are available when DTS-ES decoding is not engaged.

–DTS-ES listening modes cannot be activated unless both side and rear speakers are present.

Note:

The table below is not applicable to the DTS-ES THX, DTS THX ULTRA2, and DTS THX MUSIC listening modes.

		Input Source
Parameter Setting	5.1-Channel DTS	5.1-Channel	6.1-Channel
		Matrix-Encoded DTS-ES	Discrete-Encoded DTS-ES
ES DECODING: AUTO	DTS	DTS-ES	DTS-ES
ES DECODING: ON	DTS-ES	DTS-ES	DTS-ES
ES DECODING: OFF	DTS	DTS	DTS

5-23