AV1 | Setup |
INPUT SELECT PARAMETER SETTINGS
The table below describes INPUT SELECT parameter settings.
DIGITAL | ANALOG | AUTO | |
|
|
| |
The AV1 automatically sets the INPUT SELECT | The AV1 automatically sets the INPUT SELECT | The AV1 automatically sets the INPUT SELECT | |
parameter to DIGITAL when the ANALOG IN | parameter to ANALOG when the DIGITAL IN | parameter to AUTO when both digital and | |
parameter is set to NONE. | parameter is set to NONE. | analog audio input connectors are assigned. | |
• The AV1 sends the assigned digital audio | • The AV1 sends the assigned analog audio | • The AV1 toggles between sending the | |
input connector to the audio output | input connector to the audio output con- | assigned digital and analog audio input | |
connectors. The AV1 ignores the | nectors. The AV1 ignores the assigned digi- | connectors to the audio output connec- | |
assigned analog audio input connector. | tal audio input connector. | tors based on the input source that is | |
• The digital audio input connectors are com- | • The ANALOG IN parameter assigns an ana- | present. For example: | |
- When a | |||
patible with PCM (44.1kHz, 48kHz, | log audio input connector for the selected | ||
88.2kHz and 96kHz), Dolby Digital and | input. | or | |
| automatically selects the assigned digi- | ||
audio source (for example, MPEG or MP3) |
| tal audio input connector. | |
is present, the AV1 automatically selects the |
| - When an SACD source is present and a | |
assigned analog audio input connector. |
| ||
| digital source is not present, the AV1 | ||
|
| ||
• The DIGITAL IN parameter assigns a dig- |
| automatically selects the assigned ana- | |
ital audio input connector for the |
| log audio input connector. | |
selected input. |
| • The AUTO setting is recommended for | |
|
| ||
|
| components that generate both digital | |
|
| and analog signals, such as DVD/SACD | |
|
| players. | |
|
|
|