Fostex LR16 Other functions, Adjusting the display contrast, Setting the footswtich function

Model LR16 [Recorder function / Other functions]

Other functions

Adjusting the display contrast

If the display is difficult to see, you can adjust the display contrast by rotating the [MENU] dial while the LR16 is turned on.

Rotating the [MENU] dial counterclockwise increases the contrast. Rotating the [MENU] dial clockwise decreases the contrast.

(3) Use the [MENU] dial to highlight "Foot SW" and press the [ENTER] key.

The current setting starts flashing and you can now change the setting (by default, "P I/O" flashes).

<Memo>: The contrast setting remains in effect even if you turn off the LR16. If you initialize the system memory via the "Sys default memory" menu item of the "System" menu, the contrast reverts back

to the default setting.

You can select from the following options.

Setting the footswtich function

You can select the function of a footswitch connected to the [FOOT SW] jack on the rear panel of the main unit between the punch in/out function and memory play start/stop function.

(1)Press the [ENTER] key to bring up the

P I/O	A connected footswitch acts as the
	punch in/out switch.
MEM 0 A connected footswitch acts the same

Ias the associated memory key.Press-

Iing the footswitch starts or stop

MEM 9 memory play.

(4)Use the [MENU] dial to highlight the desired option and press the [ENTER] key to confirm the setting.

MENU screen.	(5) Press the [STOP] key to exit the MENU
When you bring up the MENU screen for	mode.
the first time, "Mark point" is highlighted.

(2)Use the [MENU] dial to highlight "System" and press the [ENTER] key.

The display now shows the system menu screen.

<Memo>: If you initialize the system memory via the "Sys default memory" menu item of the "System" menu, the footswitch function reverts back to the default setting (P I/O).

77