Setting FS/Bit of project | Fostex LR16 specs

Model LR16 [Recorder function / Other functions]

Setting FS/Bit of project

You can select the FS (sampling frequency) and Bit length combination of a newly cre- ated project. By default, it is set to 44 kHz/16 bits.

<Note>: The FS/Bit setting here does not af- fect to existing projects. The setting affects to a project recorded by the new project mode or a project newly created via the "Project" menu of the MENU mode.

(5)Press the [STOP] key to exit the MENU mode.

The selected FS/Bit combination is shown on the Home screen.

(1)Press the [ENTER] key to bring up the MENU screen.

When you bring up the MENU screen for the first time, "Mark point" is highlighted.

(2)Use the [MENU] dial to highlight "System" and press the [ENTER] key.

The display now shows the system menu screen.

(3)While "Default FS" menu is highlighted, press the [ENTER] key.

The current setting starts flashing (by default, "44K/16" is selected).

(4)Use the [MENU] dial to select the desired FS/Bit combination and press the [ENTER] key to confirm the setting.

You can select from "44K/16" (default), "44K/24", "48K/16" and "48K/24".

<Note>: If you change the FS/Bit combi- nation of an existing project and attempt to make recording, the following warn- ing message appears. Revert to the origi- nal FS/Bit combination of the project.

<Memo>: If you initialize the system memory via the "Sys default memory" menu item of the "System" menu, the FS/Bit combination reverts back to the default setting ("25FPS").

83

Image 83

Fostex LR16 manual Setting FS/Bit of project, While Default FS menu is highlighted, press the Enter key

Contents

Model LR16 Safety Instructions Important Safety Instructions Table of contents Adjusting the input level Low-cut filter Limiter Equalizer Signal flow of the mixer Connecting sources Recorder functions Recording/Playback Adding a mark Adding a mark on-the-fly Setting on the memory play setup screenPerforming memory play Recorder functions Other functions SpecificationsRecorder functions File transfer to/from a computer Introduction About power supplyPrecautions on installation About copyrights About version upgradeCleaning the exterior Condensation Overview Main features Recorder section main unit features Unpacking the carton Before using the unit Mounting the main unit and control unit on the rack Setting the main unit and control unit separatelyUsage examples of LR16 Integrating the main unit and control unit Necessary items Integrating the control unit and main unit Rack mount adaptor After attaching the adaptor Preparation of power supply Connecting the power cordTurning on the power Connection example live recording Connection to external devices MTR Connection example home recording Balanced Balanced and unbalanced inputs/outputs Names and functions Control unit input channel 1 through Solo switch POST/PRE switchMute switch 14 ST/1-2/3-4 assign switches Monitor section Control unit Master channelSUB in jacks and control Recorder control section Phantom 1-8, 9-16 indicatorsInternal effects section Output Limiter switch AUX Send controls / Solo switches24 27 EFF Send control / Solo switch Assign to Stereo OUT switches Main unit front panel Control unit rear panel REC Track Select 1-16 keys NEW Project keyTransport keys ST MIX key Main unit rear panel Display details Home screen Memory play setup mode screen Menu mode screen Model LR16 Names and functions Mixer functions Mixer basics Signal flow of the mixer Phantom power supply setting Connecting sourcesAdjusting the input level Connecting sources to the input connectors Limiter Gain adjustment while monitoringEqualizer Low-cut filter Post-fader Using an external effect processorUsing AUX 1, 2 Pre-fader Applying the internal effects Using the internal effects processorUsing Insert About the effect types Monitoring Solo monitor Channel grouping Set the Source switches on channels 15 and 16 to TRK Using SUB Block diagram Recorder functions Recorder basics Recording/playbackRecording format Project Recording mode Bass Live recording Recording to tracks 1 through Preparation Adjusting input level =recording level of each mixer channel Recording Adjusting the channel output levels sent to the stereo buss Press the Play key in the recorder or mixer section Playing back a projectLocate to the beginning of the project Multitrack recording Connecting a sound sourceAdjusting the input level while playing back tracks 1 Overdubbing Performing overdub Mixdown Starting mixdown recording Adjusting level and sound of each track Punch in/out Punch in/out using the transport control keys At the punch out point, press only the Play key Punch in/out using a footswitch Model LR16 Recorder functions / Recording/playback Memory play Numeric key number 0 through 9 Memory Setup key in the recorderPress the Enter key Section of the main unit Selecting a channel pair for memory play Selecting the memory play modeAfter you complete assignment,press EXIT/NO key Press an illuminated numeric key Performing memory play Adding a mark via the mark list screen Mark functionAdding a mark Adding a mark on-the-fly Press the Enter key to bring up the Menu screen Locating to a mark pointEditing a mark Editing a mark label Editing a mark position Example of label editing Edit the time data in the following manner Deleting a mark While Select is highlighted, press Project managementSelecting a project Creating a new project Use the Menu dial to highlight Rename press the Enter key Editing a project name Use the 3 key to enter a Rolling back a projectName editing example Right Use the Menu dial to highlight Roll back press the Enter key Saving a project to an external medium Use the Menu dial to highlight Export press the Enter key Export screen detailsEditing the duration Selecting tracks Press any operation key Copying a stereo mix file to an external medium Select the files to be exported Selecting a desired fileSelecting all files Deleting a project Protecting a project Display now shows the project list screen Use the Menu dial to highlight USB and press the Enter key Enabling USB connection LR16 E Protecting the internal hard diskWhile USB to PC is highlighted, press the Enter key While ? is flashing on the screen, press the Enter key Copying data from the LR16 to a computer Press the Enter key to bring up Adjusting the display contrastSetting the footswtich function Other functions While holding down the Record key, press the Enter key Setting items DefaultFormatting the internal hard disk Initializing the system memory Use the Menu dial to highlight Input and press the Enter key To assign the destination channels of SUB Method Software version upgrade Turn on the LR16 Press the Enter key to bring up Menu screen Midi connection Setting frame rateMidi synchronization Midi message supported by the LR16 While Default FS menu is highlighted, press the Enter key Setting FS/Bit of project Inputs/Outputs SpecificationsInput and Output Main unit Input and Output Controller unit Main unit Physical dimensionsPower Consumption approx W General Model LR16 Midi Implementation Chart Affect of Immunity on This Equipment Declaration of EC Directive Forthe US Customers only Fostex America Limited Warranty Shipping 45, 52 IndexPage Fostex CO