Fostex LR16 manual After you complete assignment,press EXIT/NO key, Selecting the memory play mode

Model LR16 [Recorder functions / Memory play]

6)After you complete assignment,press the

[EXIT/NO] key.

The display returns to the memory play setup screen, where "Sound file" is highlighted.

• Selecting a channel pair for memory play

Using the "Assign/MemPlay" menu item, you can select a mixer channel pair to which the memory play signal is assigned. By default, No channels are selected ("-/-" is shown).

In the following description, it is assumed that the memory play setup screen is shown.

<Note>: To enable the memory play function, you have to select a channel pair (other than "-/-").

7)Use the [MENU] dial to highlight "Assign/

MemPlay" and press the [ENTER] key.

You can select an odd/even channel pair from 1/2 to 17/18, or -/-.

<Note>: You cannot assign the memory play and the Sub in signals to the same channel pair. If you attempt to assign the memory play signal to the same channel pair as the Sub in signal, the following message is shown for a few seconds.

If you want to assign the memory play sig- nal to the channel pair to which the Sub in signal is currently assigned, change the as- signment of the Sub in signal in the follow- ing steps before selecting the channel pair for the memory play signal.

1.Use the [MENU] dial to highlight "SubIn" and press the [ENTER] key.

2.Use the [MENU] dial to select a desired channel pair and press the [ENTER] key.

<Note>: If you attempt to assign the memory play signal to a channel whose corresponding track is currently record- armed, the following message is shown for a few seconds.

8)Use the [MENU] dial to select a desired

channel pair and press the [ENTER] key.

The memory play signal is now assigned to the selected channel pairs.

If necessary, select the memory play mode as described below.

• Selecting the memory play mode

You can select the memory play mode be- tween "ONCE" and "REPEAT". By default, it is set to "ONCE". When you perform memory play in this mode, the LR16 plays back a ste- reo mix file once and stops.

The following describes how to select the memory play mode. It is assumed that the memory play setup screen is shown.

9)Use the [MENU] dial to highlight "Play

mode" and press the [ENTER] key.

The current setting flashes. You can select between "ONCE" and “REPEAT".

59