Fostex LR16 Enabling USB connection, Use the Menu dial to highlight USB and press the Enter key

Model LR16 [Recorder function / File transfer to/from a computer]

File transfer to/from a computer

By connecting the [USB PC] port of the main unit to your personal computer, you can transfer audio files between the LR16 and the personal computer.

You can copy audio data recorded by the LR16 to the hard disk of your computer and import to a computer software application such as Digidesign Pro Tools.

You can also transfer the software upgrade file downloaded from our website to the LR16.

INPUT

GROUP (+4dBu)

EFF SEND (-2dBu)

AUX SEND (-2dBu)

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

R

STEREO OUT (+4dBu)

L

ST MIX OUT (-10dBV)

USB

MIDI OUT

FOOT SW

CONTROLLER

PANEL LOCK

LOCK

PHANTOM

POWER

[USB PC] port

USB cable

Personal computer

supporting USB

connection

<Note>: The LR16 can connect to a computer running Windows ME/2000/XP/Vista or Macintosh OS X. Check the OS of your computer before using it with the LR16.

*All company names and product names on this manual are trademarks, registered trademarks, or trade names of their respective holders.

Connecting the LR16 to a personal computer

Connect the [USB PC] port of the LR16 to the USB port of your computer using a USB cable, as shown above. (Note that no USB cable is supplied with the LR16.)

<Note>: Before you connect the LR16 to your computer, turn off the power of both the machines.

<Note>: While a USB memory stick is con- nected to the [USB HOST] port, you cannot connect a personal computer to the [USB PC] port. When you connect a personal computer to the [USB PC] port, do not connect any de- vice to the [USB HOST] port.

Enabling USB connection

After you connect the LR16 to your computer, turn on the both machines and follow the procedure below to enable USB connection. In the following procedure, it is assumed that any project is loaded to the recorder of the LR16.

(1)Press the [ENTER] key to bring up the MENU screen.

When you bring up the MENU screen for the first time, "Mark point" is highlighted.

(2)Use the [MENU] dial to highlight "USB" and press the [ENTER] key.

The display now shows the USB menu screen.

74