Fostex LR16 manual Home screen, Display details

Model LR16 [Names and functions]

(11) [EFF SEND] jack

This unbalanced phone jack outputs the EFFECT buss signal at -2dBu nominal level. You can connect to the input jack of an effects processor, etc.

(12) [USB HOST] port

By connecting a FAT16 or FAT32 USB memory stick to this port, you can copy project data (or stereo mix file) to the memory stick and then transfer it to a computer. You can also use the USB memory stick when upgrading the version. (Note that you cannot use the [USB HOST] and [USB PC] ports simultaneously.)

(13) [USB PC] port

By connecting to the [USB] port of a personal computer using a USB cable, you can transfer files between the computer and the LR16 by the computer operation. (Note that you cannot use the [USB HOST] and [USB PC] ports simultaneously.)

(14) [GROUP OUT (1, 2, 3, 4)] connectors

These balanced phone jacks output the group buss signals at +4dBu nominal level. You can connect these jacks to input connectors of an external mixer, etc.

(15) [ST MIX OUT (L, R)] jacks

These unbalanced RCA pin jacks output the stereo L and R buss signals. You can connect these jacks to an external master recorder, etc.

(16) [STEREO OUT (L, R)] connectors

These XLR balanced connectors output the stereo L and R buss signals. You can connect these connectors to a power amplifier for driving main speakers on stage, etc.

Display details

HOME screen

While stopped or during playback or recording, the Home screen as below is shown. On the Home screen, the following items are displayed.

	a	b	c
			d
	j		e
	i
			f
		h	g
a)	Project number		b) Project name

The project number of the current project is displayed in three digits.

The project number of the first project created on the internal hard disk is "001" and the project number is counted up each time a project is created.

The project name of the current project is displayed.

The project name of the first project created on the internal hard disk is "PROJ001" and the last three-digit number is counted up each time a project is created.

You can specify the default project name via the "Rename" menu item in the "Project" menu of the MENU mode.

30