Fostex manual Turn on the LR16 Press the Enter key to bring up Menu screen

Model LR16 [Recorder function / Other functions]

In the following procedure, it is assumed the fol- lowing. The upgrade file is transfered to the inter- nal hard disk of the LR16 or the USB memory stick to which the upgrade file is copied from a personal computer is connected to the [USB HOST] port of the LR16, The LR16 is turned off.

(6)Use the [MENU] dial to highlight the upgrade file (with ".MOT" extension) and press the [ENTER] key.

The confirmation message appears.

(1) Turn on the LR16.

(2)Press the [ENTER] key to bring up the

MENU screen.

When you bring up the MENU screen for the first time, "Mark point" is highlighted.

(3) Use the [MENU] dial to highlight "System" and press the [ENTER] key.

The display now shows the system menu screen.

<Memo>: To cancel version upgrading, press the [STOP] key.

(4)Use the [MENU] dial to highlight "Version" and press the [ENTER] key.

The current software version is shown.

(5)While holding down the [RECORD] key, press the [ENTER] key.

The upgrade file which is stored to the internal hard disk (or the USB memory connected to the [USB HOST] port) is displayed.

(7)While holding down the [RECORD] key, press the [ENTER] key.

The LR16 starts upgrading the software version and the display changes as follows. It takes some time until completing the software upgrade.

(8)When upgrading is completed, press the [STOP] key to exit the MENU mode.

(9)Turn the LR16 off and then on.

81