Model LR16 [Recorder functions / Project management]

After completing exporting data, the follow- ing popup appears.

(5)Press any operation key.

The LR16 exit the MENU mode and the display returns to the Home screen.

Protecting a project

You can protect the current project.

<Note>: You cannot execute punch in/out or additional recording to a protected project.

(4)Use the [MENU] dial to select "On" (or "Off") and press the [ENTER] key to confirm the setting.

(5)Press the [STOP] key or repeatedly press the [EXIT/NO] key to exit the MENU mode.

The display returns to the Home screen of the project.

On the Home screen of a protected project, the "locked" icon is shown as below.

(1)Press the [ENTER] key to bring up the MENU screen.

When you bring up the MENU screen for the first time, "Mark point" is highlighted.

(2)Use the [MENU] dial to highlight "Project" and press the [ENTER] key.

The display now shows the project menu.

Deleting a project

You can delete an unnecessary project from the hard disk.

<Note>: You cannot undo deleting a project. Make sure before deleting a project.

(1) Press the [ENTER] key to bring up the MENU screen.

When you bring up the MENU screen for the first time, "Mark point" is highlighted.

(2) Use the [MENU] dial to highlight "Project" and press the [ENTER] key.

The display now shows the project menu.

(3) Use the [MENU] dial to highlight "Protect" and press the [ENTER] key.

The current protection setting (Off or On) flashes and you can now change the setting.

72

Page 72
Image 72
Fostex LR16 manual Protecting a project, Deleting a project