Recorder section main unit features | Fostex LR16 specification

Model LR16 [Introduction/Overview]

•3-band (High/Mid/Low) input equalizer on each input channel.

•Insertion point on input channel 1 through 8, allowing connection to an external comp/limiter, etc.

•XLR-phone combo type connector provided on each input channel, allowing mic or line connection. In addition, phantom power can be supplied to each XLR connector, allowing use of a condenser microphone. (You can turn on or off phantom power in eight channel groups.)

•Four group outputs allow connection to an external mixer or multitrack recorder.

•Aux and effect sends allow connection to an external effect unit, a stage monitor system, etc.

Recorder section (main unit) features

•Built in a large capacity hard disk drive which allows up to 16 track digital recording (approx. 16 hour recording in 44.1 kHz/16 bit, 80GB).

•In addition to up to 16 track recording, stereo mix recording is possible. Also, multitracks and stereo mix can be recorded simultaneously.

•Mark function allows locating to a mark.

•132 x 64 dot graphic LCD allows viewing the level meters and information at a glance.

•Memory play function is provided, allowing instant playback using the numeric keys as well as a footswitch (the footswitch function can be selected using the System menu of the MENU mode).

•Punch in/out function using the panel keys as well as a footswitch.

•By connecting a computer to the [USB PC] port, you can transfer audio files (note that you cannot simultaneously use the [USB HOST] port).

•By connecting a FAT16 and FAT32 formatted USB flash memory stick, you can copy audio files or version upgrade file.

•From the [MIDI OUT] port, MTC (MIDI Time Code) can be output, allowing synchronization with external MIDI devices (the MTC frame rate can be selected between 25 fps and 30 fps via the System menu of the MENU mode).

12

Image 12

Fostex LR16 manual Recorder section main unit features

Contents

Model LR16 Safety Instructions Important Safety Instructions Table of contents Signal flow of the mixer Connecting sources Adjusting the input level Low-cut filter Limiter Equalizer Recorder functions Recording/Playback Setting on the memory play setup screen Performing memory playAdding a mark Adding a mark on-the-fly Specifications Recorder functions File transfer to/from a computerRecorder functions Other functions About power supply Precautions on installationIntroduction About version upgrade Cleaning the exteriorCondensation About copyrights Main features Overview Recorder section main unit features Before using the unit Unpacking the carton Setting the main unit and control unit separately Usage examples of LR16Integrating the main unit and control unit Mounting the main unit and control unit on the rack Integrating the control unit and main unit Necessary items Rack mount adaptor After attaching the adaptor Connecting the power cord Turning on the powerPreparation of power supply Connection to external devices Connection example live recording Connection example home recording MTR Balanced and unbalanced inputs/outputs Balanced Names and functions Control unit input channel 1 through POST/PRE switch Mute switch14 ST/1-2/3-4 assign switches Solo switch Control unit Master channel SUB in jacks and controlMonitor section Phantom 1-8, 9-16 indicators Internal effects sectionRecorder control section AUX Send controls / Solo switches 24 27 EFF Send control / Solo switchAssign to Stereo OUT switches Output Limiter switch Control unit rear panel Main unit front panel NEW Project key Transport keysST MIX key REC Track Select 1-16 keys Main unit rear panel Home screen Display details Menu mode screen Memory play setup mode screen Model LR16 Names and functions Mixer functions Signal flow of the mixer Mixer basics Connecting sources Adjusting the input levelConnecting sources to the input connectors Phantom power supply setting Gain adjustment while monitoring EqualizerLow-cut filter Limiter Using an external effect processor Using AUX 1, 2Pre-fader Post-fader Using the internal effects processor Using InsertApplying the internal effects Monitoring About the effect types Channel grouping Solo monitor Using SUB Set the Source switches on channels 15 and 16 to TRK Block diagram Recorder functions Recording/playback Recording formatRecorder basics Recording mode Project Live recording Bass Recording to tracks 1 through Adjusting input level =recording level of each mixer channel Preparation Adjusting the channel output levels sent to the stereo buss Recording Playing back a project Locate to the beginning of the projectPress the Play key in the recorder or mixer section Connecting a sound source Adjusting the input level while playing back tracks 1Overdubbing Multitrack recording Mixdown Performing overdub Adjusting level and sound of each track Starting mixdown recording Punch in/out using the transport control keys Punch in/out Punch in/out using a footswitch At the punch out point, press only the Play key Model LR16 Recorder functions / Recording/playback Memory play Memory Setup key in the recorder Press the Enter keySection of the main unit Numeric key number 0 through 9 Selecting the memory play mode After you complete assignment,press EXIT/NO keySelecting a channel pair for memory play Performing memory play Press an illuminated numeric key Mark function Adding a markAdding a mark on-the-fly Adding a mark via the mark list screen Locating to a mark point Editing a markEditing a mark label Press the Enter key to bring up the Menu screen Example of label editing Editing a mark position Deleting a mark Edit the time data in the following manner Project management Selecting a projectCreating a new project While Select is highlighted, press Editing a project name Use the Menu dial to highlight Rename press the Enter key Rolling back a project Name editing exampleRight Use the 3 key to enter a Saving a project to an external medium Use the Menu dial to highlight Roll back press the Enter key Export screen details Editing the durationSelecting tracks Use the Menu dial to highlight Export press the Enter key Copying a stereo mix file to an external medium Press any operation key Selecting a desired file Selecting all filesSelect the files to be exported Protecting a project Deleting a project Display now shows the project list screen Enabling USB connection Use the Menu dial to highlight USB and press the Enter key Protecting the internal hard disk While USB to PC is highlighted, press the Enter keyWhile ? is flashing on the screen, press the Enter key LR16 E Copying data from the LR16 to a computer Adjusting the display contrast Setting the footswtich functionOther functions Press the Enter key to bring up Setting items Default Formatting the internal hard diskInitializing the system memory While holding down the Record key, press the Enter key To assign the destination channels of SUB Use the Menu dial to highlight Input and press the Enter key Software version upgrade Method Turn on the LR16 Press the Enter key to bring up Menu screen Setting frame rate Midi synchronizationMidi message supported by the LR16 Midi connection Setting FS/Bit of project While Default FS menu is highlighted, press the Enter key Specifications Input and Output Main unitInput and Output Controller unit Inputs/Outputs Physical dimensions Power Consumption approx WGeneral Main unit Midi Implementation Chart Model LR16 Declaration of EC Directive Affect of Immunity on This Equipment Forthe US Customers only Fostex America Limited Warranty Shipping Index 45, 52Page Fostex CO