Fostex LR16 manual Menu mode screen, Memory play setup mode screen

Model LR16 [Names and functions]

c) Time display

The current ABS time of the current project is displayed in "hour:minite:second:frame" format. If no recording has been made to the internal hard disk, the time display shows "--H--M--S--F". During recording or playback, the current recorder status icon is shown in the frame digit, as below.

Recorder Icon

During playback

During recording

During forwarding

During rewinding

d) Remain

The remaining time of the hard disk is displayed. It is displayed only while arming tracks or during recording. Increasing the number of recording tracks decreases the remaining time.

e) Sampling frequency and bit rate

The combination of sampling frequency and bit rate currently selected in the "Default FS" menu item in the "System" menu of the MENU mode is displayed. When recording a new project, this combination is applied.

If the displayed combination does not match the current project, it flashes.

f) Protection

The lock icon is displayed when the current project is protected. You cannot make recording or editing when a protected project is loaded. You can protect or deprotect the current project using the "Protect" menu item in the "Project" menu of the MENU mode.

g) Level meters for stereo busses

The signal levels of the stereo L and R busses are displayed.

h) Tracks

A record-armed track is displayed in flashing. When you starts recording, it changes from flashing to lighting.

<Examples>

If you arm track 4: "4" flashes.

If you arm stereo mix track using the [ST

MIX] key: "LR" flashes.

i) Level meters for tracks 1 through 16

Each level meter shows the input (recording) level when the corresponding track is in record ready or record mode, while it shows the track playback level when the corresponding track is being played back.

j) Panel lock

When the panel lock function is engaged, the panel lock key icon is displayed. When the lock key is displayed, the operation keys on the recorder section of the main unit are disabled.

MENU mode screen

While the recorder stopped, pressing the [ENTER] key in the recorder section of the main unit enters the MENU mode and brings up the following screen.

This screen allows you to select a main menu. By using the [MENU] dial to highlight the desired main menu and pressing the [ENTER] key, the display shows the next menu level. (The ">" icon on the screen indicates that the next menu level exists.)

There are the following five main menus.

1.Mark point menu

2.Project menu

3.Input menu

4.System menu

5.USB menu

Memory play setup mode screen

While the recorder stopped, pressing the [MEMORY SETUP] key in the recorder section of the main unit brings up the memory play setup screen as below.

In this screen, you can make setting for memory play including the channel assignment, playlist setting and play mode setting, as well as destina- tion assignment of the "Sub In" signal.

31