Fostex LR16 manual Export screen details, Editing the duration, Selecting tracks

Model LR16 [Recorder functions / Project management]

(3)Use the [MENU] dial to highlight "Export" press the [ENTER] key.

After the LR16 checks the USB memory, the display shows the export screen.

For details about the information shown on this screen, see "Export screen details" de- scribed below.

If you simply execute step (4) on the next page without changing any parameter, data of full length (from ABS 0 to REC END) of all tracks (1 through 16) is exported to the USB memory stick.

Before you execute step (4), however, you can shorten the length of the project or se- lect tracks to be exported (see the right col- umn on this page for details).

<Export screen details>

1

2

3

4

5

Duration of the project to be exported. By de-

1fault, the full length (from ABS 0 to REC END) is shown.You can edit and shorten it.

2The start track to be exported (by default, 01). You can change it.

The end track to be exported (by default, 16).

3You can change it. The value in parentheses shows the required space for storing.

4The volume label of the USB memory stick. The free area of the USB memory stick.

<Note>: If you attempt to export the

5project data which exceeds the free area of the USB memory stick, "Over size!" is shown and you cannot execute ex- porting data.

<Editing the duration>

1)While "Duration" is highlighted, press the [ENTER] key.

The second digit starts flashing.

2)Use the [MENU] dial or numeric keys to enter the desired value at the flashing point, and press the [ENTER] key.

You can use the [REWIND] or [F FWD] key to move the cursor (flashing point).

<Note>: Pressing the [CLEAR] key resets the duration to "00H 00M 00S". If you shorten the duration, the value in parentheses shown at the right of the "End TR" number gets smaller.

<Selecting tracks>

1)Use the [MENU] dial to highlight "Start TR" (or "End TR") and press the [ENTER] key.

The track number of the starting track (or ending track) starts flashing.

2)Use the [MENU] dial to enter the desired track number and press the [ENTER] key to confirm the setting.

<Note>: If you limit the tracks, the value in parentheses shown at the right of the "End TR" number gets smaller.

69